HILINK MODULES

Product Details:

Additional Information:

• Packaging Details: DIP

Product Details:

Additional Information:

• Packaging Details: TRAY

Product Details:

Description:-

• XL6009 module is a non-isolated step-up boost voltage converter featuring adjustable output voltage, high efficiency. It converts input voltage of 5-32V DC to an output voltage of 4-38V DC.

Features:-

• Wide input voltage 3V ~ 32V, optimum operating voltage range is 5 ~ 32V;
• Wide Output voltage 5V ~ 35V;
• Built-4A efficient MOSFET switches enable efficiency up to 94%; (LM2577 current is 3A)
• High switching frequency 400KHz, can use a small-capacity filter capacitors that can achieve very good results, the ripple smaller and smaller. (LM2577 frequency only 50KHz)

Test Results:-

• Input 3V Output 12V 0.4A 4.8W
• Input 5V Output 12V 0.8A 9.6W
• Input 7.4V Output 12V 1.5A 18W
• Input 12V Output 15V 2A 30W
• Input 12V Output 16V 2A 32W
• Input 12V Output 18V 1.6A 28.8W
• Input 12V Output 19V 1.5A 28.5W
• Input 12V Output 24V 1 A 24W

Vin * Iin * Efficiency = Vout * Iout

• Vin: Input Voltage
• Iin: Input current
• Vout: Output Voltage
• Iout: Output current

Technical Parameters:-

• Module Properties: Non-isolated boost (BOOST)
• Rectification: Non-Synchronous Rectification
• Input Voltage Range: 3V ~ 32V
• Output Voltage RAnge: 5V ~ 35V (Note: If you want to get the max voltage, you should make the input current as least 3A)
• Input Current: 4A (max), no-load 18mA (5V input, 8V output, no-load is less than 18mA. Higher the voltage, the greater the load current.)

Conversion efficiency:

• Switching frequency: 400KHz
• Output Ripple: 50mV (the higher the voltage, the greater the current, the greater the ripple)
• Load Regulation: ± 0.5%
• Voltage Regulation: ± 0.5%
• Operating Temperature: -40 ? ~ +85 ?
• Dimensions: 43mm * 21mm * 14mm (L * W * H)

 
When using these modules remember that the output current will be a lot less than the input current, (remember - W = VA). For example, if you have a 10V output at 1A from a 5V input, the input current will be around 3.6A. The real-life maximum amount of power you can get out of these things is around 10W. 
Output current is greater than 2.5A (or output power greater than 10W) to work long hours, please add heat sink.

Product Images are shown for illustrative purposes only and may differ from actual product.

Additional Information:

• Delivery Time: AGAINST ORDER

Product Details:

• This DC/DC step-down voltage converter's input voltage between 4.5V and 28V into a smaller voltage between 0.8V and 18V, capable of driving a 3A load with excellent line and load regulation.

• Wide 4.5V to 28V Operating Input Range
• Up to 92% Efficiency
• Programmable Switching Frequency from 100kHz to 1.5MHz
• High-Efficiency Pulse Skipping Mode for Ceramic Capacitor Stable
• Internally Set Current Limit without a Current Sensing Resistor
• Cycle-by-Cycle Over Current Protection
• Input Under Voltage Lockout

Additional Information:

• Packaging Details: BOX

Product Details:

Additional Information:

• Packaging Details: TRAY

Product Details:

Additional Information:

• Packaging Details: tray

Product Details:

Additional Information:

• Packaging Details: dip

Product Details:

Additional Information:

• Packaging Details: DIP

Product Details:

Additional Information:

• Packaging Details: DIP

Product Details:

Additional Information:

• Packaging Details: DIP

Product Details:

Additional Information:

• Packaging Details: dip

Product Details:

Additional Information:

• Packaging Details: TRAY

Product Details:

FEATURES:

 Universal 85-305VAC or 100-430VDC input voltage

 Accepts AC or DC input (dual-use of same terminal)

 Operating ambient temperature range: -40??? to +85???

 High I/O isolation test voltage up to 4000VAC

 Regulated output, low ripple & noise

 Output short circuit, over-current, over-voltage protection

 High efficiency, high reliability

 Plastic case meets UL94V-0 flammability

 Meet EMI CISPR32/EN55032 CLASS B

 IEC/EN/UL62368 safety approval

Additional Information:

• Production Capacity: 5000

Product Details:

Make: Mornsun
Manufacturer Part Number: LD05-23B05R2
AC Input Voltage Range : 85 – 305VAC
DC Input Voltage Range : 100 – 430 VDC
No of Output : 1
Output Voltage: 5V
Output rated current : 1 A
Power (Watts) : 5W
Operating Temperature : -40°C – 85°C (TA)
Efficiency : 77.5%
Mounting: Through Hole
Package: 5-DIP Module
Dimensions: 25.4mm x 25.4mm x 17.6mm
Weight: 18g
Case Material: Black plastic, flame-retardant and heat-resistant
Safety Standards: IEC/EN/UL62368/EN60335/EN61558
Certification: CB, CE, cURus

This AC-DC converters is one of Mornsun’s compact size power converter. It features ultra-wide AC input and at the same time accepts DC input voltage, low power consumption, high efficiency, high reliability, reinforced isolation. It offers good EMC performance compliant to various safety standards.

The converters are widely used in industrial, power, home appliances, instrumentation, communication and civil applications.

Additional Information:

• Production Capacity: 5000