LCD Modules

Product Details:

QUICK OVERVIEW

1. Driver IC: SSD1306
2. Resolution: 128 x 64
3. Visual Angle: >160°
4. Input Voltage: 3.3V ~ 6V
5. Only Need 2 I/O Port Control
6. Pixel Color: Blue

OLED’s are the future of displays, as they possess some of the greatest advantages over both conventional display technologies of LCD’s and LED‘s.

The most attractive thing about using the OLED displays is that they do not need a back-light like conventional LCD/LED screens. The organic material itself has a property known as Electroluminescence (EL), which causes the material to “glow” when stimulated by a current or an electric field. Best energy saving displays ever!!!

This 0.96″ OLED Display Module offers 128×64 pixel resolution. They are featuring much less thickness than LCD displays with good brightness and also produce better and true colors. 

This OLED Display Module is very compact and will add a great ever user interface experience to your Arduino project. The connection of this display with Arduino is made through the I2C(also called as IIC) serial or SPI interface.

The 0.96″ OLED Display Module produces blue text on black background with very good contrast when supplied with DC 2.8V supply. The OLED Display Modules also offers a very wide viewing angle of about greater than 160°.

Setting up SPI/I2C Connection with GMS096A OLED Module :

Being a new entry into the market, only limited resources are available on this small piece of a miracle (GMS096A). I2C/SPI configuration always demands helpful resources as in any case. For the SPI setup, the module comes in 4 wire SPI configuration by default and to make it work with the Arduino you can use these libraries from Adafruit.

For the I2C setup, it demands a little bit of work on the module, let us start with resoldering the resistor from position R3 to R1 and then short the R8 resistor with some soldering tin (0 Ohm resistor). The R6 and R7 pullup resistors are already soldered, nothing to do there. Once done, the module is ready for I2C communication! The CS Pin is not necessarily needed, so just connect it to GND. The DC Pin selects the address. For standard address wire it to GND. The RES-pin needs a low pulse at startup and a high voltage during operation (as in SPI mode), a 100nF capacitor to GND and a 10k resistor to VCC would be ideal!

Features :

1. No need of the backlight
2. The display is self-illuminating
3. Power requirement is low
4. They are offering the large viewing angle
5. Full Compatible with Arduino
6. Factory configured for SPI protocol (can easily change to IIC)
7. Better performance characteristics than traditional LCD and LED displays.
8. Only Need 2 I/O Port Control

Package Includes :

1 x 0.96″ OLED Display Module – SPI/I2C – 128×64 – 7 Pin (Blue)

Additional Information:

• Item Code: SSD1306
• Production Capacity: 50000
• Delivery Time: 12-15 DAYS
• Packaging Details: DIP

Product Details:

Description:

Operating voltage:DC 4 ~ 30V
Measure voltage: DC 0 ~ 100V
Minimum resolution(V): 0.1V
Measure current :50A (require external shunt)
Minimum resolution(A): 0.1A
Operating current: <20mA
Display: three 0.28" LED digital tube
Display color: Red and Blue (two-color display)
Refresh rate: about 300mS / times
Measure accuracy: 1% (± 1 digit)
Operating temperature: -10 to 65° c
Operating Humidity: 10 to 80% (non-condensing)
Working pressure: 80 to 106 kPa
Applications:Suitable for automotive/electric cars/motorcycles battery monitoring or other products voltage current measurement

Wiring:

Black line (thin): vacant or buck circuit (module) negative
Red line (thin): power supply+
Black line (thick): COM, common measuring
Red line (thick): PW+, measuring terminal voltage input positive
Yellow line (thick): IN+, current input+
(Please refer to the wiring diagrams for more details)

Product Details:

Product DescriptionProduct description:

How to use:
1. Press the Show start temperature button.
2. Long press button that flashes the temperature display, press the up or down button.
3. Set the start temperature value.
4. Press the button to display the stop temperature.
5. Long push button that flashes the temperature display, press up or down.
6. Button set the stop temperature value

Specification:

• Power Supply: 12V DC; Power: 120W; Color of Displaying: red/blue; Sensor: NTC10K Waterproof sensor

• Item Type: Digital temperature controller; Type of output: direct output; Output capacity: 10 A max

• Temperature measurement range: -50 ° C ~ 110 ° C; Temperature Control Range: -50 ° C ~ 110 ° C; Temperature Control Accuracy: 0.1 ° C

• Measuring input: NTC10K waterproof probe L=1 M.

• Mounting hole distance: 73mm (hole distance 4mm); Size: 60 * 45 * 31mm.

Product Details:

Product Specification Product Description

We are renowned organizations of market for presenting the optimum quality range of L298N Dual Motor Driver Module, which is extremely employed in the industry.

Product Details:

Product DescriptionSpecifications:
Display: 20 x 4 character
Outline: 146.0 x 55.0 x 13.5
VA: 123.5 x 43.0
Controller: SPLC780D
Character: 4.48 x 9.75
Driver: 1/16
LCD: STN Yellow Green
Backlight: Yellow Green LED
Also Available LCD: STN Blue Negative, Backlight: White LED

Product Details:

QUICK OVERVIEW

1. Driver IC: SSD1306
2. Resolution: 128 x 64
3. Visual Angle: >160°
4. Input Voltage: 3.3V ~ 6V
5. Only Need 2 I/O Port Control
6. Pixel Color: Blue

OLED’s are the future of displays, as they possess some of the greatest advantages over both conventional display technologies of LCD’s and LED‘s.

The most attractive thing about using the OLED displays is that they do not need a back-light like conventional LCD/LED screens. The organic material itself has a property known as Electroluminescence (EL), which causes the material to “glow” when stimulated by a current or an electric field. Best energy saving displays ever!!!

This 0.96″ OLED Display Module offers 128×64 pixel resolution. They are featuring much less thickness than LCD displays with good brightness and also produce better and true colors. 

This OLED Display Module is very compact and will add a great ever user interface experience to your Arduino project. The connection of this display with Arduino is made through the I2C(also called as IIC) serial or SPI interface.

The 0.96″ OLED Display Module produces blue text on black background with very good contrast when supplied with DC 2.8V supply. The OLED Display Modules also offers a very wide viewing angle of about greater than 160°.

Setting up SPI/I2C Connection with GMS096A OLED Module :

Being a new entry into the market, only limited resources are available on this small piece of a miracle (GMS096A). I2C/SPI configuration always demands helpful resources as in any case. For the SPI setup, the module comes in 4 wire SPI configuration by default and to make it work with the Arduino you can use these libraries from Adafruit.

For the I2C setup, it demands a little bit of work on the module, let us start with resoldering the resistor from position R3 to R1 and then short the R8 resistor with some soldering tin (0 Ohm resistor). The R6 and R7 pullup resistors are already soldered, nothing to do there. Once done, the module is ready for I2C communication! The CS Pin is not necessarily needed, so just connect it to GND. The DC Pin selects the address. For standard address wire it to GND. The RES-pin needs a low pulse at startup and a high voltage during operation (as in SPI mode), a 100nF capacitor to GND and a 10k resistor to VCC would be ideal!

Features :

1. No need of the backlight
2. The display is self-illuminating
3. Power requirement is low
4. They are offering the large viewing angle
5. Full Compatible with Arduino
6. Factory configured for SPI protocol (can easily change to IIC)
7. Better performance characteristics than traditional LCD and LED displays.
8. Only Need 2 I/O Port Control

Package Includes :

1 x 0.96″ OLED Display Module – SPI/I2C – 128×64 – 7 Pin (Blue)

Additional Information:

• Production Capacity: 5000
• Delivery Time: 10-12 days

Product Details:

Product Specification Product DescriptionSpecifications:
Display: 240 × 128 dots
Outline: 144.0 x 104.0 x 12.5
VA: 114.0 x 61.0
Controller: T6963C OR EQUIV
Character: 0.40 x 0.40
Driver: 1 / 128
LCD: STN Yellow Green
Backlight: Yellow Green LED
Also Available LCD: STN Blue Negative, Backlight: White LED

Additional Information:

• Packaging Details: box

Product Details:

Product Specification Product DescriptionSpecifications:
Display: 128 × 64 dots
Outline: 93.0 x 70.0 x 14.0
VA: 70.7 x 38.8
Controller: KS0108 OR EQUIV
Character: 0.48 x 0.48
Driver: 1 / 64
LCD: STN Yellow Green
Backlight:Yellow Green LED
Also Available LCD: STN Blue Negative, Backlight: White LED

Additional Information:

• Packaging Details: BOX

Product Details:

CAN IMPORT ALL NEXTION LCD AT BEST PRICE
Product DescriptionNextion is a seamless Human Machine Interface (HMI) solution that provides a control and visualization interface between a human and a process, machine, application or appliance. Nextion is mainly applied to Internet of thing (IoT) or consumer electronics field. It is the best solution to replace the traditional LCD and LED Nixie tube.

Nextion includes a hardware part (a series of TFT boards) and a software part (the Nextion editor). The Nextion TFT board uses only one serial port to communicate. It lets users avoid the hassle of wiring. We noticed that most engineers spend much time in application development but get unsatisfactory results. As a solution to this situation, Nextion editor has mass components such as button, text, progress bar, slider, instrument panel etc. to enrich the interface design. Furthermore, the drag-and-drop function ensures that users spend less time in programming, which will reduce 99% of their development workloads. With the help of this WYSIWYG editor, designing a GUI is a piece of cake.
It's easy to adapt Nextion family HMI to existing projects. Users just need to provide it a UART.
3.5" Basic Nextion NX4832T035 HMI TFT Intelligent Display Module is a powerful 3.5' HMI, which is member of Nextion family. Features include: a 3.5" TFT 480x320 resistive touch screen display, 16M Flash, 3.5KByte RAM, 65k colors.

Features:

480 x 320 Resolution
RGB 65K true to life colors
TFT Screen with integrated 4-wire Resistive Touch Panel
Easy 4 pin interface to any TTL Serial Host
16M Flash memory for User Application Code and Data
Onboard micro-SD card for firmware upgrade
Visual Area:73.44mm(L)×48.96mm(W)
Adjustable Brightness:0~180 nit, the interval of adjustment is 1%
5V500mA DC recommended a power supply
5V145mA power consumption

 

Additional Information:

• Packaging Details: DIP

Product Details:

Product Specification Product Description

Features:

• A single module can drive an 8 * 8 common cathode lattice
• Module Operating voltage: 5V.
• Module size: 5 cm long X 3.2 cm wide X 1.5 cm high
• With four screws hole, aperture 3mm
• Module with input and output interfaces
• Supports multiple modules cascade
• Led colour: Red

Product Details:

Product Specification Product Description

Description

This DC6-12V MINI Aquarium water Pump R385 is the perfect choice for any project that requires water to be moved from one place to another. Its application includes a small aquarium pump, automatic plant watering system, making a water feature or music activated dancing water features to name but a few. When pumping a liquid the pump runs very quietly. The pump is also capable of pumping air, though when pumping air the pump is quite noisy in comparison.

The R385 requires between 6 – 12V DC and between 0.5 – 0.7A and will deliver its maximum operating values when power is at the upper end of these ranges. The pump can handle pumping heated liquids up to a temperature of 80°C and when suitably powered can suck water through the tube from up to 2m and pump water vertically for up to 3m.

This immersible pump can be used to water your plants, make a fountain or waterfall, and even change your fish tank water. It works quietly with the sound level under 30db. The pump has a filter inside as well as a suction cup which can help stick it to smooth surfaces tightly.

Features :

1. Recommended voltage ratings are 9v 1A or 12v 1A.
2. Maximum suck range of 2m.
3. The maximum head range of 3m.
4. Works with liquids of up to 80°C.
5. The maximum flow rate of up to 1 – 3L/min.

5 in

Product Details:

This is a temperature-controlled thermostat switch that can be used to control the heating/cooling of an object with the help of the NTC sensor to detect the temperature. The module is operated by the 12VDC connected at the input terminals. The module has two output ports where you can connect the equipment to heat or cool the test system.

Application:

1. Outdoor use uses involving potential chemical contamination or electrical interference
2. Nuclear energy control systems, combustion systems, railroad systems, aviation systems
3. Medical equipment, amusement machines, vehicles, safety equipment, and installations subject to separate industry or government regulations
4. Systems, machines, and equipment that could present a risk to life or property
5. Domestic freezer, water tanks, refrigerator, industrial chiller, steamer, industrial equipment, and another temperature-controlled system.

Features:

1. Mini temperature controller.
2. With a clear LED display for better readability.
3. Wide temperature measuring range.
4. Dual heating and cooling control.
5. Automatic over-temperature alarm
6. Relay output.
7. High Control precision 0.1 centigrade

Package Includes:

1 x STC-1000 DC12V Digital Temperature Controlled Thermostat Switch

Specifications :-

Product Details:

TB6600 Arduino Stepper Motor Driver is an easy-to-use professional stepper motor driver, which could control a two-phase stepping motor. It is compatible with Arduino and other microcontrollers that can output a 5V digital pulse signal.

TB6600 Arduino stepper motor driver has a wide range of power input, 9~42VDC power supply. And it is able to output 4A peak current, which is enough for the most of stepper motors. The stepper driver supports speed and direction control.

You can set its micro step and output current with 6 DIP switch. There are 7 kinds of micro steps (1, 2 / A, 2 / B, 4, 8, 16, 32) and 8 kinds of current control (0.5A, 1A, 1.5A, 2A, 2.5A, 2.8A, 3.0A, 3.5A) in all. And all signal terminals adopt high-speed optocoupler isolation, enhancing its anti-high-frequency interference ability. As a professional device, it is able to drive 57, 42-type two-phase, four-phase, hybrid stepper motor.

TB6600 Stepper Motor Driver Controller 4A 9~42V TTL 16 Micro-Step CNC 1 Axis Upgraded Version of the 42/57/86 Stepper Motor segment increased to 32 segments, suitable for high subdivision applications. Suitable for step motor :57, 42, 86Type 4 phase 2 phase (4 line 6 line 8).

Product Details:

LCD FULL RANGE