New Items

Product Details:

HFD 24V 10A DC HF115F-H/024-1ZS3B 8-Pin SPDT Power Relay

Features:

 

• High sensitive: 0.25W
• Low height: 15.7 mm
• 5kV dielectric strength (between coil and contacts)
• Creepage distance: 10mm
• Meeting VDE 0700, 0631 reinforce insulation
• Sockets available
• Product in accordance to IEC 60335-1 available
• Plastic sealed and flux proofed types available

 

Specifications:

 

• Type : HF115F-H/024-1ZS3B
• Switching Current (A,Res.load) : 10A
• Contact arrangement : 1 Form C
• Coil version : single contact
• Terminal Type : PCB
• Mounting : PCB-THT
• Construction :  Plastic sealed
• Terminals : 5.0mm 1 pole
• Contact material : AgNi
• Sort : Standard
• Coil voltage : 24
• Coil power: Approx 0.25W
• Insulation standard : Class F
• Coil voltage form : DC
• Rated voltage(V) : 250VAC
• Volume（mm³) : 29.0×12.7×15.7 (mm)

Product Details:

L80-M39 GPS IOT Module

The L80-M39 is a GPS POT (Patch on Top) module. This is a GPS module and integrated patch antenna within a really compact package. It’s the perfect module for integrating into the smallest devices to enable acquisition and tracking functionality. The L80-M39 also offers automatic antenna detection and short circuit protection.
The L80-M39 is ideal for portable devices, automotive, personal tracking and security. It can even be used to automatically predict orbits.

.

Product Details:

Product Specification Product DescriptionHF46F/12-HS1 POWER RELAY 12V / 5A 1 POLE 1 FORM A AGNI 4 PIN 

HF46F/24-H2 POWER RELAY 24V / 5A 1 POLE 1 FORM A AGNI 4 PIN

We can supply this item in bulk and at very good price.

If any requirement kindly revert back with your enquiries.
Additional Information

Product Details:

HFD27/0005-S is a subminiature DIP relay which can be mounted on a 16 pin IC base. This is a Double Pole Double Throw (DPDT) type relay and is Epoxy Sealed so can be used with automatic wave soldering machines. The HFD27/0005-S relay has bifurcated contacts thus reduce contact bounce, increase reliability and assist in switching. Bifurcated contacts conduct the switching more efficiently.

Features:

 

• 8A switching capability
• 5kV dielectric strength (between coil and contacts) 
• Low height: 12.5 mm
• Creepage distance >8mm 
• Meeting VDE 0700, 0631 reinforce insulation
• Product in accordance to IEC 60335-1 available 
• 1 pole configurations available
• UL insulation system: Class F 
• Plastic sealed and flux proofed types available 

 

Specifications:

 

• Brand : Hongfa
• Coil Voltage (DC) : 5 V
• Contact Arrangement : 2 Form C
• Contact Current Rating : 2 A
• Termination : PCB 
• Construction : Plastic sealed
• Mounting : DIP
• Contact capacity : AgNi+Au plated
• Contact plating : Au plated
• Release time : < 4ms
• Coil power : 200mW
• Insulation resistance :1000MOhm
• Dielectric strength (between coil & contacts) : 2000VAC 1min
• Operate time : < 7ms
• Ambient temperature : -40~85C
• Max Switching Voltage (VDC) : 120VDC
• Max Switching Voltage (VAC) : 240VAC
• Max Switching Current (AC) : 2AC
• Weight : 5gm
• Electrical endurance : 100000
• Size : 20x10x11.5mm
• Mechanical endurance : 100000000

Product Details:

BMA280, Digital Triaxial Acceleration SensorThe BMA280 is a 14-Bit, digital, tri-axial acceleration sensor with intelligent on-chip motion-triggered interrupt controller.
Accelerometer programmable function ranges ±2g/±4g/±8g/±16g
On-Chip FIFO (First In First Out)
Motion-triggered interrupt-signal generation
Ultra-Low Power
Power modes: Normal, Low-Power1, Low-Power2, Standby, Suspend, Deep-Suspend
Temperature Sensor 8-bit
Tap-sensing, Orientation recognition, Flat detection
Supported digital interfaces are I²C and SPI with operating Voltage from 1.2V to 3.6V
Two Power Supplies for the main power, and separate power for the interface
Small package 12-pin LGA

Specifications

Product Details:

• Introduction

Mt7628 product family of Lianfa technology is a new generation of 2T2R 802.11n Wi Fi AP / router (system single chip). Mt7628 can improve RF performance, reduce power consumption, and optimize the overall bill of materials (BOM) cost, making it the most cost-effective 2x211n solution. Mt7628 product family integrates 2T2R 802.11n Wi Fi transceiver, 580mhz MIPS? 24kec ™ A simultaneous interpreting and processing system (CPU), a 5 port high-speed Ethernet port physical layer (Ethernet PHY), AES128/256 security engine, USB2.0 host, PCIe host, and multiple slow input and output (I/O) that connect different sensors. The mt7628a can be connected to the external dynamic random memory (DRAM) of the 11ac synchronous dual band router. Router mode provides 5p Fe switch, which is mainly designed for routing applications. On the other hand, the IOT mode supports 1p Fe and many slow I / O. Users can join 802.11ac chipset to establish 802.11ac synchronous dual band IOT gateway. Mt7628k has built-in 8MB memory, providing eCos package solution for small router, repeater, Internet of things bridge, storage and audio application. The functions provided by mt7628n are similar to those of mt7628a. The only difference is that mt7628n's PCI mode and IOT mode are mainly designed for N300 router.
Company IntroductionShenzhenTROLINK Technology Co., Ltd. was established in 2005. It is a national high-tech enterprise and a "regulatory enterprise"
in Baoan District, Shenzhen. Focus on the development and production of WiFi modules, routing modules, TWS Bluetooth headset
board, and undertake OEM and ODM orders. The company has independent research and development, production and sales. Passed
ISO9001 quality management system certification. It has a standardized SMT production line, multiple new Yamaha high-speed
placement machines, multiple IQ flex, extreme sinks, WiFi, Bluetooth automatic testers, and automated test machines. Obtained many
intellectual property rights and FCC, CE, Telec and other international technical certifications. It has many software and
hardware engineers and maintains good cooperative relations with mainstream WiFi chip TWS chip manufacturers REALTEK, MTK and
Qualcomm.

Product Details:

We deal in and provide LED PCBs

 

Features:

•  Lightweight, low profile.
• Lower cost backlit membrane switch.
• Dust and moisture resistant.
• Easy to integrate into complex interface assemblies.

Get the best price for LED PCB