Product Details:
Minimum Order Quantity | 100 pair |
Usage/Application | DIY projects,Battery operated toys,Radio controlled vehicles |
Voltage | 3v-9v |
torgue | Approximate 2.5Kg/cm. |
gear material | plastic |
feature | Quietness of operation,Capability to absorb shock and vibration as a result of elastic compliance |
RPM | 100 |
The 150 RPM Single Shaft BO Motor - Straight motor gives good torque and rpm at lower operating voltages, which is the biggest advantage of these motors.
Small shaft with matching wheels gives an optimized design for your application or robot. Mounting holes on the body & light weight makes it suitable for in-circuit placement. This motor can be used with 69mm Diameter Wheel for Plastic Gear Motors.
It is an alternative to our metal gear DC motors. It comes with an operating voltage of 3-12V and is perfect for building small and medium robots.
The motor is ideal for DIY enthusiasts. This motor set is inexpensive, small, easy to install, and ideally suited for use in a mobile robot car. They are commonly used in our 2WD platforms.
Specifications of 150 RPM Single Shaft BO Motor - Straight:-
Voltage | 3V - 12V |
Usage/Application | DIY projects,Battery operated toys,Radio controlled vehicles |
Torque | Approximate 2.5Kg/cm. |
Features | Quietness of operation,Capability to absorb shock and vibration as a result of elastic compliance |
RPM | 100 |
Gear materials | Plastic |
Motor types | Permanent-magnet |
Brush-type | Brush |
Magnet types | Ferrite magnets |
Minimum Order Quantity | 1 Piece |
PRODUCT DETAILS
Generally used in DIY projects, Battery operated toys, Radio controlled vehicles, Robotic projects etc.
OTHER DETAILS
RPM: 150
Operating Voltage : 3V - 12V
Gear materials: plastic.
Torque: Approximate 2.5Kg/cm.
Motor types: permanent-magnet.
Brush-type: Brush.
Magnet types: ferrite magnets.
FEATURES
Ability to operate with minimum or no lubrication, due to inherent lubricity.
Capability to absorb shock and vibration as a result of elastic compliance.
Corrosion-resistance; elimination of plating, or protective coatings.
Quietness of operation.
Low density: lightweight, low inertia.
Tolerances often less critical than for metal gears, due in part to their greater resilience.
Product Details:
Minimum Order Quantity | 5 Piece |
Number Of Stages | standard |
Motor Horsepower | standard |
Brand | jyy |
Usage/Application | industrial |
Model Name/Number | JYY(B)-Y-30-1 |
Power Rating | standard |
Additional Information:
Product Details:
Minimum Order Quantity | 10 Piece |
Brand | MG |
Usage/Application | INDUSTRIAL |
Power | INDUSTRIAL |
Voltage | INDUSTRIAL |
Model Name/Number | MG996 |
Speed | STANDARD |
Connector Wire Length | 300 mm |
Gear Type | All Metal Gears |
Dimension | 40mm x 19mm x 43mm |
Weight | 55 g |
Operating Speed | 0.17sec / 60 degrees (4.8V no load) / 0.13sec / 60 degrees (6.0V no load) |
Stall Torque | 13 kg-cm (180.5 oz-in) at 4.8V / 15 kg-cm (208.3 oz-in) at 6V |
Operation Voltage | 4.8 - 7.2 Volts |
Connector Wire | Heavy Duty, 11.81" (300mm) |
Specifications:
Product Details:
Minimum Order Quantity | 10 Piece |
Usage/Application | robotics |
Speed | 0.13sec |
Part No. | MG995 |
Maximum Torque | standard |
Stall torque | 15 kg at 6 V |
Operating Temperature | -20 to 50 Degree C |
Operating speed | 0.13 sec |
Stall torque | 15 kg at 6 V |
Operating Temperature | -20 to 50 Degree C |
Minimum Order Quantity | 1 |
Owing to our affluent industry acquaintance, we present Robotic Servo Motor. In addition, experts check these products on diverse industry parameters to ensure the sturdy nature
Product Details:
Voltage | 3 V |
Phase | Single Phase |
Shape | Cubiod |
Size | Standard |
Application | For Industrial Use |
No of Poles | 2 |
Shaft Length | 7 mm |
Shaft Diameter | 5.5 mm |
Weight Gm | 24 |
Output Range | 0.35 kg cm. |
Nominal Current | 40-180mA |
I Deal In | New Only |
The 200 RPM Dual Shaft BO Motor - Straight motor gives good torque and rpm at lower operating voltages, which is the biggest advantage of these motors.
Small shaft with matching wheels gives an optimized design for your application or robot. Mounting holes on the body & light weight makes it suitable for in-circuit placement. This motor can be used with 69mm Diameter Wheel for Plastic Gear Motors.
It is an alternative to our metal gear DC motors. It comes with an operating voltage of 3-12V and is perfect for building small and medium robots.
The motor is ideal for DIY enthusiasts. This motor set is inexpensive, small, easy to install, and ideally suited for use in a mobile robot car. They are commonly used in our 2WD platforms.
Specifications of 200 RPM Dual Shaft BO Motor - Straight:-
Features of 200 RPM Dual Shaft BO Motor - Straight:-
Product Details:
Minimum Order Quantity | 200 Piece |
Brand | CHINESE |
Material | PLASTIC |
Operating Current | 100-200MA |
Weight | 28GRAM |
Type Of Submersible Pumps | HORIZONTAL |
Pump Size | 50*25MM |