Temperature And Humidity Sensor

Product Details:

The MLX90614 ESF is an Infra-Red thermometer for non-contact temperature measurements. Both the IR sensitive thermopile detector chip and the signal conditioning ASIC are integrated into the same TO-39 can. The Integrated MLX90614 GY-906 is a low noise amplifier, 17-bit ADC, and powerful DSP unit thus achieving high accuracy and resolution of the thermometer.

The user can configure the digital output to be PWM. As a standard, the 10-bit PWM is configured to continuously transmit the measured temperature in the range of -20 to 120 C, with an output resolution of 0.14 C.

Application:

1. High precision non-contact temperature measurements
2. Thermal Comfort sensor for Mobile Air Conditioning control system
3. The temperature sensing element for residential, commercial and industrial building air conditioning Windshield defogging
4. The automotive blind angle detection
5. Industrial temperature control of moving parts
6. Temperature control in printers and copiers
7. Home appliances with temperature control
8. Healthcare
9. Livestock monitoring
10. Movement detection
11. Multiple zone temperature control up to 127 sensors can be read via common 2 wires
12. Thermal relay/alert
13. Body temperature measurement

Features:

1. Works from 3.3V to 5V input, Module has power regulator IC built-in.
2. Standard I2C interface with built 2xpull upresistors
3. When measuring the temperature, please maintain a measuring distance of 1 cm
4. Small size, low cost
5. Easy to integrate
6. Factory calibrated in a wide temperature range: -40 to 125 C for sensor temperature and -70 to 380 C for object temperature.
7. High accuracy of 0.5C over the wide temperature range (0..+50 C for both Ta and To)
8. Medical accuracy of 0.1C in a limited temperature range available on request
9. The measurement resolution of 0.01C
10. SMBus compatible digital interface for fast temperature readings and building sensor networks
11. Customizable PWM output for continuous reading
12. Simple adaptation for 8 to 16V applications

Package Includes:

1 x MLX90614-ESF GY-906 Non-Contact Human Body Infrared Temperature Measurement Module

Specifications:-

Additional Information:

• Production Capacity: 1000000
• Delivery Time: 12-15 days
• Packaging Details: to-39

Product Details:

Product Specification Product DescriptionFeatures:

• The LM35 datasheet specifies that this ICs are precision integrated-circuit temperature sensors, whose output voltage is linearly proportional to the Celsius (Centigrade) temperature.
• Calibrated directly in o Celsius (Centigrade)
• Linear + 10.0 mV/oC scale factor
• 0.5oC accuracy guaranteeable (at +25oC)
• Rated for full −55o to +150oC range
• Suitable for remote applications
• Low cost due to wafer-level trimming
• Operates from 4 to 30 volts
• Less than 60 µA current drain
• Low self-heating, 0.08oC in still air
• Nonlinearity only ±1⁄4oC typical
• Low impedance output, 0.1 Ω for 1 mA load
• Inclusions
• 1 X LM35 / LM35DZ

Product Details:

Feature:

• Mini size, high quality temperature controller, Wide temperature measuring range, 50~+110 Degree Centigrade
• With large and clear LED display for better readability
• Multiple functions, such as Heating and Cooling control, Temperature Calibration function, Delay protection function
• All parameters can be set to default setting after short circuit
• Can be used for domestic freezer, water tanks, refrigerator, industrial chiller, boiler, steamer, industrial equipments and other temperaturecontrolled systems

Additional Information:

• Production Capacity: 500

Product Details:

Being one of the consistent firms in the industry, we are engaged in providing a superb range of Infrared Temperature Sensors.